| Item | Specification:Parameters can be customized as needed |
|---|---|
| Model | HC - 50SF |
| Nominal Force | 50 kN / 5T |
| Stroke | 300 mm |
| Working Table Size | 500 × 450 mm |
| Max Opening Height | 450mm |
| Press Speed | 0.1–100 mm/s, adjustable |
| Pressure Accuracy | ±0.5%FS |
| Position Accuracy | ±0.01mm |
| Power Supply | 380V 3Phase / Customizable |
| Control System | Servo motor + PLC + Touch screen |
| Data Output | CSV export, real-time curve display |
| Safety Standard | CE compliant |





Energy‑saving & clean operation — Fully electric drive without hydraulic oil, zero oil‑leak risk. Servo motor consumes power only during pressing cycle, cutting energy consumption by 70‑85 % compared with conventional hydraulic presses, ideal for clean‑room production.
Ultra‑high closed‑loop precision — Dual closed‑loop control of force and displacement. Repeat positioning accuracy up to ±0.01 mm and force accuracy ±0.5 %. Full force‑displacement curve recording, automatic OK/NG judgement and full‑part data traceability are supported.
Flexible programmable process — Multi‑segment programming for pressing speed, force, stroke and holding time. Multiple control modes including force‑control, position‑control are available. Product recipes can be stored and recalled for flexible multi‑variant production.
Low noise & fast response — Ball‑screw transmission with operating noise below 65 dB. Instant start‑stop without idle running, well‑suited for high‑speed precision assembly.
Low maintenance — No hydraulic power unit, oil pipes or sealing parts. Eliminates oil‑changing work and reduces long‑term maintenance cost.
Highly customizable — Tonnage, stroke, frame type (C‑frame / four‑post) and table size are configurable. Optional integration of auto loading‑unloading, custom tooling, vision positioning, barcode scanning and MES interface for full‑automated workstation.
Safety compliance — Equipped with E‑stop, safety light curtain, interlocked safety door and servo STO (Safe Torque Off). Can be built to CE / AS/NZS 60204‑1 for overseas factory audit requirements.
Precision press‑fitting — Press‑fitting of bearings, bushings, motor stator‑rotor assemblies, connector & terminal crimping, riveting and insert assembly.
Automotive industry — Precision assembly for motor components, sensors and rubber damping parts, complying with IATF16949 traceability requirements.
3C electronics — PCB crimping, miniature component assembly, housing & button pressing to avoid damage to delicate small parts.
New‑energy industry — Press‑fitting & shaping for battery structural parts, insulators, copper busbars and cell assemblies.
Medical devices — Medical component assembly and plastic joining, oil‑free for clean‑manufacturing environment.
Light industry & new materials — Small‑scale plastic hot‑pressing, film lamination and precision powder compacting.
✅ 1‑year full‑machine warranty & 2‑year warranty for core components including servo motor, force sensor and ball‑screw
✅ Lifetime technical support
✅ Quick fault response with remote & on‑site service
✅ Tooling modification & process‑optimization support
✅ FAT factory acceptance, SAT site commissioning and operator training available